Mold Bacteria Consulting Services

Serving Ontario and British Columbia

  • Home
  • About MBS
  • Services
    • Mold Inspection
    • Bacteria Testing
    • Bioburden Testing
    • Legionella Investigation
    • Online Training
  • Equipment/Supplies
  • iBlog
  • Kids’ Corner
    • School Science Fair Projects
    • Bacteria Pictures
    • Fungal Pictures
  • Contact Us
  • Login
You are here: Home / iBlog

Do You Have Normal Mold Levels For Various Types Of Mold?

Jackson Kung'u

Question: Do you have the normal mold levels for various types of mold, i.e. Cladosporium cladosporioides? Thank you.

Answer: Currently there are no widely accepted normal airborne mold levels. Although no exposure standards have been established that relate health effects to specific airborne mold levels, there are concerns from public health agencies regarding exposure to mold. Much evidence exists indicating that indoor exposures to molds contribute to occupant respiratory disease and symptoms. Mold levels are used to give us an indication of whether the occupants are exposed to mold originating from indoor environment. According to the American Conference of Government Industrial Hygienists (ACGIH), indoor mold levels should be less than 1/3 of outdoors levels.  If indoor levels are above this amount, action should be taken to identify the source or location of mold growth and remove it.  It’s important to note that the outdoor levels of mold can vary quite a lot over the different seasons and even week to week and the same is reflected indoors.

In the literature, 3000 spores per cubic meter of air is quoted as the allergenic threshold for Cladosporium. More recently a figure of 4000 spores per cubic meter of air has been cited. For Alternaria, 100 spores per cubic meter of air is cited in the literature as the allergenic threshold.

It is normal to find mold spores in any indoor environment in the air and surfaces such as clothes, walls, and furniture.  Most of the time mold spores found indoors during a mold inspection is from outside sources and do not pose a hazard. Regular housekeeping cleaning helps keep mold levels low. Cleaning small areas of visible mold, like the mold around your shower, is important to maintain sanitary conditions.

References

  • Hollins, P.D., P.S. Kettlewell, M.D. Atkinson, D.B. Stephenson, J.M. Corden, W.M. Millington and J. Mullins. Relationships between airborne fungal spore concentration of Cladosporium and the summer climate at two sites in Britain. International Journal of Biometeorology Volume 48, Number 3, 137-141.

If you're new here, you may want to subscribe to my RSS feed. Thanks for visiting!

Welcome Back!

Filed Under: Fungi, MBL Answers Tagged With: allergy, Alternaria, cladosporium, mold levels

How Do We Find This Mold And Get Rid of It?

Jackson Kung'u

Question: My son is having a severe allergic reaction to this mold. How do we find it and get rid of it? Could he have gotten in by playing outside in the woods?

Answer: To be able to answer your question, we need more information about this mold. However, if you suspect mold in your home, you may consider bringing in a professional to conduct an investigation.

Filed Under: Fungi, MBL Answers Tagged With: allergy

How Long do Mould Symptoms Typically Last?

Jackson Kung'u

Question: My question regards how long mould symptoms typically last. I have found what appears to be a mould growing on my window. It is gooey in texture and clear in colour. The window is often wet with condensation to the point it drips down continually for hours on end.

I am not sure if the jelly like characteristic of the mould is because of the water or because that is it’s composition. Recently the mould was disturbed by somebody in our room (they opened the window). My wife had just left the room for a while with our infant daughter (10 months) for medical reasons as this person had to come in. When she came back into the room fifteen minutes or so passed when her nose started running. Being allergic to mould she immediately told me it had been disturbed and she could smell it. She now has had for the last four days what appears to be cold like symptoms. Are these mould symptoms? What should we do? How long do mould symptoms typically last? Does my description of the mould sound at all like anything particularly dangerous? Would this be a danger to our daughter? We don’t actually have anywhere else we could live so this is important to us how we handle it. Could putting plastic window covering that seals with heat keep it from the room or would it disturb it too much? It wasn’t here in the summer but seems to have happened from the washing that we’ve hung in the room drying without any ventilation. We’re concerned for our daughter so if you could let us know asap we’d so appreciate it. As I said, we live in this room and she is in the room nearly 24 hours every day. Thank you for your time.

Answer: I haven’t found any scientific literacy that documents how long mould symptoms last. In my opinion, this could depend on the extent of damage the mould had done on an individual’s health or immune system. The extent of damage will depend on an individual’s resistant to mould exposure. Some people experience mould symptoms only when they are in a mouldy environment.

From the description you’ve given, it’s difficult to tell what type of mould it is and whether it’s dangerous or not. However, all moulds are potentially a health hazard.

Covering the mould with plastic is not a good solution since spores could still find their way into the air you’re breathing. You’ve already identified the cause of the mould growth on the window, that is, condensation due to poor ventilation and the washing that you’ve been hanging in the room.  The solution is to correct the moisture problem and to clean the existing mould. I would suggest you look for a qualified professional who could advise you on how to improve the ventilation, reduce condensation, and also how to remove the mould without spreading spores in the room. Read “ Mold Removal Guidelines ” to learn more about mould removal.

After mould removal the mould symptoms your family is experiencing are likely to disappear.

Filed Under: Fungi, MBL Answers Tagged With: allergy, mould, mould exposure, mould growth, mould removal, mould symptoms

Health Hazards in Pools, Hot Tubs and Spas

Jackson Kung'u

Pools, hot tubs and spas occasionally get contaminated with harmful bacteria such as E. coli, Legionella pneumophila, Pseudomonas aeruginosa, Mycobacterium avium, Streptococcus and Salmonella. These bacteria are known to cause serious diseases in humans such as infection of the skin, eyes, ears, hair follicles, intestines and urinary tract.

More serious illnesses are the Legionaires’ Disease and Pontiac Fever acquired from inhaling airborne Legionella cells. This occurs when Legionella becomes airborne by way of aerosol mists produced in spas and hot tubs.

Legionella bacteria are able to survive in low temperatures, but thrive at temperatures between 20oC and 45oC. Legionella cannot survive at temperatures of 60oC and above.

Filed Under: Bacteria, Water Testing Tagged With: E. coli, Legionaires Disease, Legionella, Mycobacterium avium, pontiac fever, Pseudomonas aeruginosa, Salmonella, Streptococcus

Should I Seek Medical Attention?

Jackson Kung'u

Question: I have been sleeping in a damp room with a large amount of mold on the walls for about 4 months (which is in the process of being cleaned). Is this dangerous, should I seek medical attention even though I am in good health?

Answer: If you’re feeling OK then you don’t have to worry. However, I would suggest you have the mold cleaned up as soon as possible. Prolonged (long-term) mold exposure could cause health problems, including asthma, allergies or respiratory problems.

Filed Under: Fungi, MBL Answers Tagged With: allergy, asthma, health risks, mold exposure, respiratory problems

  • « Previous Page
  • 1
  • …
  • 3
  • 4
  • 5
  • 6
  • 7
  • …
  • 52
  • Next Page »

What’s New?

  • Indoor Air Quality Testing in Toronto, Ontario
  • Air Quality Testing in Vancouver, BC
  • Mold Testing in Toronto, Ontario
  • Mold Testing in Vancouver, BC
  • Salmonella food poisoning and symptoms
June 2025
S M T W T F S
1234567
891011121314
15161718192021
22232425262728
2930  
« Jun    

Salmonella food poisoning and symptoms

Salmonella food poisoning has been a growing concern in recent news. It has frequently lead to recalls of beef, salads and organic products and, even peanut butter products. Salmonella food poisoning occurs when one eats raw or undercooked foods such meat, poultry, eggs or egg products. Properly cooked food can get contaminated with Salmonella if […]

Legionella pneumophila – Guidelines for Laboratory Interpretation

Legionella pneumophila is a Gram negative, aerobic bacteria that is characterized as an opportunistic pathogen. It is the cause of Legionnaires’ Disease, a severe form of pneumonia and, it is the cause of Pontiac fever, a non-pneumonic form of L. pneumophila infection. Legionella spp.’s mode of transmission is through aerosols or aspiration of contaminated water. The Public Health […]

The Indoor Mold Is An Early Warning Device

The mold (or mould, in the Queen’s English) has been the victim of a bad press. Mention the word and it conjures up an image of something rotting or in the process of decomposition. And yet, were it not for the mold that inspired the discovery of penicillin millions of lives would have been lost. […]

Copyright © 2025 . Mold & Bacteria Consulting Services (MBS). 1020 Brevik Place, Unit 1A, Mississauga, L4W 4N7. Log in