Mold Bacteria Consulting Services

Serving Ontario and British Columbia

  • Home
  • About MBS
  • Services
    • Mold Inspection
    • Bacteria Testing
    • Bioburden Testing
    • Legionella Investigation
    • Online Training
  • Equipment/Supplies
  • iBlog
  • Kids’ Corner
    • School Science Fair Projects
    • Bacteria Pictures
    • Fungal Pictures
  • Contact Us
  • Login
You are here: Home / Fungi / Mold Sampling And Identification Methods

Mold Sampling And Identification Methods

Jackson Kung'u

Mold Sampling

The mold sampling method one chooses should be determined by the objective of the investigation. One may sample air or surfaces for mold contamination. The standard method for sampling air is to use a volumetric sampler e.g. RCS or Andersen N6 for viable airborne spores and hyphal fragments and Air-O-Cell, VersaTrap, Allergenco and others such cassettes for total spore counts. Testing of surfaces may involve use of RODAC agar plates for smooth surfaces, and swabs and adhesive tape on all other surfaces. It is important to note that adhesive tapes may not work well on wet and porous surfaces. Bulk samples can also be taken and plated onto agar plates or analysed by direct microscopic examination. Dust samples can be collect from surfaces such as carpets, upholstered furniture and textiles.

Media For Mold Sampling

It’s important to select media for mold sampling wisely. If one decides to collect viable air samples, the choice of media to use is very
important. Generally, malt extract agar (MEA) is used. It is a “broad spectrum” medium that supports the growth of a wide range of fungal species. However, antibiotics may have to be incorporated to surpress bacteria growth. Its main disadvantage is that fast growing molds tend to overgrow slow growers making it difficult to count colonies. To overcome this problem, DG18 and Rose Bengal can be used. These media have compounds added to them to slow down fast growing fungi and inhibit bacterial growth. If one is sampling a relatively dry environment, MEA+40% sucrose would be recommended for detecting xerophilic (dry loving) fungi.

Mold Identification

Currently, the only reliable means for routine identification of mold species is to perform traditional mycological methods. This requires years of training and practice. Be sure to use a lab that has a qualified Mycologist on-board (preferably at PhD level). The lab should also be regularly participating in a recognised proficiency testing program such as the AIHA EMPAT program.

Performing Effective Mold Sampling

If you need to take mold samples, use properly trained personnel or to get yourself trained. If you decide to undergo training, select a mold training course that provides skills and background information to enable you recognize indoor mold, develop effective mold sampling strategies, and interpret laboratory results.

If you're new here, you may want to subscribe to my RSS feed. Thanks for visiting!

Welcome Back!

Related posts:

  1. Sampling for Airborne Mould: When Should One Use Viable, Non-viable or Both Methods? An air quality investigation may require determining airborne mould (spores...

Filed Under: Fungi, Microbial Sampling Tagged With: Andersen, dg18, malt extract agar, mea, mold sampling, RCS, rose bengal, viable

What’s New?

  • Indoor Air Quality Testing in Toronto, Ontario
  • Air Quality Testing in Vancouver, BC
  • Mold Testing in Toronto, Ontario
  • Mold Testing in Vancouver, BC
  • Salmonella food poisoning and symptoms
May 2025
S M T W T F S
 123
45678910
11121314151617
18192021222324
25262728293031
« Jun    

Salmonella food poisoning and symptoms

Salmonella food poisoning has been a growing concern in recent news. It has frequently lead to recalls of beef, salads and organic products and, even peanut butter products. Salmonella food poisoning occurs when one eats raw or undercooked foods such meat, poultry, eggs or egg products. Properly cooked food can get contaminated with Salmonella if […]

Legionella pneumophila – Guidelines for Laboratory Interpretation

Legionella pneumophila is a Gram negative, aerobic bacteria that is characterized as an opportunistic pathogen. It is the cause of Legionnaires’ Disease, a severe form of pneumonia and, it is the cause of Pontiac fever, a non-pneumonic form of L. pneumophila infection. Legionella spp.’s mode of transmission is through aerosols or aspiration of contaminated water. The Public Health […]

The Indoor Mold Is An Early Warning Device

The mold (or mould, in the Queen’s English) has been the victim of a bad press. Mention the word and it conjures up an image of something rotting or in the process of decomposition. And yet, were it not for the mold that inspired the discovery of penicillin millions of lives would have been lost. […]

Copyright © 2025 . Mold & Bacteria Consulting Services (MBS). 1020 Brevik Place, Unit 1A, Mississauga, L4W 4N7. Log in