Mold Bacteria Consulting Laboratory, British Columbia, Alberta

Heterotrophic Plate Count: What is HPC and when is the right time to use it?

Heterotrophs are a group of microorganisms (bacteria, moulds and yeasts) that use organic carbon sources to grow and can be found in all types of water. In fact, the majority of bacteria found in drinking water systems are considered heterotrophs. Heterotrophic plate count (HPC) is a method that measures colony formation on culture media of heterotrophic bacteria in drinking water. Thus the HPC test (also known as Standard Plate Count) can be used to measure the overall bacteriological quality of drinking water in public, semi-public and private water systems.

The Limitations of HPC:

hpc plate count

Bacteria count

As stated by the Health Canada guidelines on HPC testing, “HPC results are not an indicator of water safety and, as such, should not be used as an indicator of potential adverse human health effects.” The World Health Organization (WHO) states that methods such as coliform testing are better indicators than HPC to test the sanitary conditions of water.

The HPC method does not indicate the specific heterotrophic bacteria present or their sources. Instead, HPC testing indicates the culturable organisms present, which could be as low as 1% of the total bacteria present. There are several factors that affect the genera of bacteria and their level of presence recovered by HPC. These factors include the type of medium used to grow the bacteria, what temperature is used for incubation, how long the plates are incubated, where the water sample was collected, the time of year and the age of the sample. It is also important to note that the concentrations and types of bacteria that are recovered at the same sampling location can vary over time.

Typically high levels of HPC bacteria in a distribution or plumbing system result from bacterial regrowth where bacteria that resisted treatment grow or those that were injured during treatment recover.

How do we interpret HPC results?

For HPC, regulations set out by Health Canada are followed under the Canadian Drinking Water Quality Guidelines: “No maximum acceptable concentration (MAC) is specified for heterotrophic plate count (HPC) bacteria in water supplied by public, semi-public, or private drinking water systems. Instead, increases in HPC concentrations above baseline levels are considered undesirable.”

In other words, sudden increases in HPC above levels typically seen may indicate a change in the quality of raw water or, that bacterial regrowth has occurred in the distribution system or plumbing. When steady increases of HPC are seen over time, this indicates a gradual decline in raw water quality.

As stated by the National Primary Drinking Water Regulations established by the U.S. EPA a “lower concentration of heterotrophic bacteria in the drinking water is linked to a better maintenance of the treatment and distribution systems.” According to these regulations, treatment techniques should aim to control HPC concentrations in surface waters and groundwaters influenced by surface waters to less than 500 CFU/mL (using standard methods). Note: “This is not a health-based standard, but reflects the concern that at concentrations above 500 CFU/mL, heterotrophic bacteria can interfere with some total coliform and E. coli recovery methods.”

Importance of HPC counts:

High HPC counts indicate ideal conditions for bacterial regrowth and should be corrected. Bacterial regrowth can lead to pipe corrosion, encourage slime growth, increase the need for disinfectants, cause foul-tasting water, and harbour secondary respiratory pathogens (ex. Legionella). Thus, HPC can be used as a marker for the underlying causes of some aesthetic problems (WHO, 2002).

Does having a positive HPC results mean the overall water quality is poor?

No, not necessarily.

Unlike other indicators, such as Escherichia coli or total coliforms, low concentrations of HPC organisms will still be present after drinking water treatment. In general, water utilities can achieve heterotrophic bacteria concentrations of 10 colony-forming units (CFU) per millilitre or less in finished water.

What are the health effects associated with HPC levels?

At an international meeting of experts in Geneva, Switzerland, it was concluded that heterotrophic bacteria in drinking water is not a health concern to the general public. However, some bacteria present in a heterotrophic population are opportunistic pathogens that could infect individuals with weakened immune systems.

“Heterotrophic bacteria belonging to the following genera have been associated with opportunistic infections: Acinetobacter, Aeromonas, Chryseobacterium (Flavobacterium), Klebsiella, Legionella, Moraxella, Mycobacterium, Serratia, Pseudomonas, and Xanthomonas. These organisms have been mainly associated with nosocomial (hospital acquired) infections, including wound infections, urinary tract infections, post-operative infections, respiratory infections, and infections in burn patients.”

What methods can be used to measure HPC?

There are 3 methods used for routine testing of heterotrophic bacteria:

  1. Pour plate method (least desirable method because embedded colonies are slower growing and microaerobic environment is not ideal for growth and, bacteria could undergo heat shock during plating).
  2. Spread plate method (heat shock is eliminated by using solidified agar but only a small volume (0.1-0.5 mL) can be tested).
  3. Membrane filtration method (most flexible method because volumes upto 10L can be tested, heat shock is eliminated by membrane filter, and  it is ideal for HPC less than 10 CFU/mL but multiple dilutions may be required to count colonies on filter).

Here at MBL, we use membrane filtration to measure heterotrophic plate count. If you need to determine the level of heterotrophic bacteria, fecal coliforms, E.coli, total coliforms, Legionella or other type of bacteria in water call our Mississauga office at 905-290-9101 or our Burnaby office at 604-435-6555 or,  our toll free number at 1-866-813-0648.


Health Canada (1996) Guidelines for Canadian Drinking Water Quality, 6th edn. Minister of Public Works and Government Services Canada, Ottawa, Ontario

Heterotrophic plate counts and drinking-water safety: The significance of HPCs for water quality and the human health. Edited by J. Bartram, J. Cotruvo, M.Exner, C. Fricker, A. Glasmacher. Published on behalf of WHO by IWA Publishing © WHO 2003:

Guidelines for Canadian Drinking Water Quality: Guideline Technical Document: Heterotrophic Plate Count (Prepared by the Federal-Provincial-Territorial Committee on Drinking Water of the Federal-Provincial-Territorial Committee on Health and the Environment (February 2006).

For access to the BC Drinking Water Protection Act and the BC Drinking Water Protection Regulation, please refer to the following website:

Guidance on the Use of Heterotrophic Plate Counts in Canadian Drinking Water Supplies (Document for Public Comment Prepared by the Federal-Provincial-Territorial Committee on Drinking Water – Consultation period ended May 27, 2011):

US EPA (1989) 40 CFR Parts 141 and 142 Drinking Water; National Primary Drinking Water Rules and Regulations; filtration, disinfection; turbidity, Giardia lamblia, viruses, Legionella, and heterotrophic bacteria; final rule. US Environmental Protection Agency. Fed. Regist. 54(124), 27486–27541.

US EPA (2001) National Primary Drinking Water Standards. EPA 816-F-01-007, March, US Environmental Protection Agency, Washington, DC (